Install The Be4000; Where To Go From Here - Cisco Business Edition 4000 Quick Start Manual

Cisco Business Edition 4000

Install the BE4000

Step 1. Unpack the BE4000 and locate the QR code (17) on the underside of the
product.
Step 2. Use a QR scanner application to scan the QR code and launch the
BE4000 portal. If you don't have a QR scanner, browse to the BE4000
portal - https://be4000.cisco.com/deploy.
Step 3. Enter the serial number (16) if prompted, and select your customer-site
configuration.
Step 4. Connect the BE4000 to the network services as described in the portal.
Step 5. We recommend that you install the BE4000 in a 19-inch rack. You can
also wall mount or place the BE4000 on any secure flat surface, if
preferred.
Step 6. If you are installing in a rack, use the illustration (14) inside the front cover
as a guide to attach the mounting brackets with the screws provided. Use
suitable fastenings to secure the product in place.
Step 7. Connect the power supply to the BE4000 (7) and the mains supply, then
switch on (6). You can track the progress of your BE4000 activation in the
portal.

Where to Go from Here

After successfully installing the BE4000, you can configure and
monitor services through the portal:
Cisco Technical Assistance Center.
Cisco BE4000 Product Information.
Warranty Information.
https://be4000.cisco.com
www.cisco.com/tac
www.cisco.com/go/be4000
www.cisco.com/go/warranty