Setting The Clock Manually; To Set The Colour System - Philips DVP3055V/19 Owner's Manual

Setting the clock Manually

The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic
Channel Memory System) when you DVD+VCR detects a
channel that broadcasts a Teletext signal. If the broadcast
signal is weak the clock will not be set and will require
setting manually.
1 Press SYSTEM MENU.
Press b or B to select SET.
Press OK.
The auto adjust mode can be set to 'OFF' by pressing
OK if you want to set the time manually.
HH MM DD
: - -
- - - -
1 2
SET
2 Use 3 or 4 on the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when you
enter the year.
HH MM DD
8 : 00 1
1 2
SET
3 If you make a mistake press b b or B B and enter the
correct details.
4
Press SYSTEM MENU.
MM YY
. . - - - - -
- -
ACSS : ON
OK i
MM YY
. 01 . 05 SAT
ACSS : OFF
OK i
Before Operation - VCR part

To set the colour system

1 Press SYSTEM MENU.
2
The main menu will appear on the TV screen.
3 Press 1 or 2 to select the SYS and press OK.
4 Press 3 or 4 to select according to the COLOUR
system used.
AUTO
PAL
1 2
Pr-12
SECAM
P SET SET
REC
ACMS
R
MESECAM
f + -
OSD OSD
ON DECO-
AUD
OFF DER
5
Press SYSTEM MENU to remove the menus from the
TV screen.
SYS
SYS
NIC
i
13