Control Board - Samsung ML-2150 Service Manual

5.6 Control Board

1. Before you remove the Control Board Ass'y, you
should remove:
- RH Cover (Refer to the 5.5)
2. Unplug the all connector, as shown below.
3. :The connectors are located as shown below.
DC Fan
Open Cover
DCU
Engine
PTL (REGI)
Maine Motor
Connector Board
Samsung Electronics
Exit
Motor Key Panel
Catridge
LSU
Disassembly and Reassembly
4. Remove six screws and take out the Control
Board.
Control Board
5. Remove four screws and take out the Control
Board Bracket.
NOTICE : One screw among the screws is locked
on the Engine Shield.(Refer to 5.25.3)
Control Board Bracket
Service Manual
5-5