Screws Securing Rear Side Of I/H Right Unit; Screws Securing Front Side Of I/H Right Unit - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
15. Move "Carriage Unit" to center of printer.
(Refer to "4.2.4.3 C593_SUB Board" (p234).)
16. Remove the two screws securing rear side of "I/H Right Unit".
(Refer to Figure 4-148.)
C.B.S. 3x6: 2 pcs.
17. Remove the two screws securing the front side of "I/H Right Unit."
(Refer to Figure 4-149.)
C.B.S. 3x12: 2pcs.
Disassembly & Assembly
Figure 4-148. Screws Securing Rear Side of I/H Right Unit
I/H Right Unit
Figure 4-149. Screws Securing Front Side of I/H Right Unit
Disassembly Procedures
I/H Right Unit
C.B.S. 3x6
C.B.S. 3x12
Revision C
312