AEG M1250 Manual page 12

6.2 Charge the battery
Warning:
Use only supplied/approved battery and charger.
Using others may be dangerous and will invalidate
approvals or warranty. A battery must be fitted.
Do not charge with the back cover removed.
• Connect the charger lead firmly into the micro-
USB socket in the bottom edge of the handset.
• Plug the mains power adapter into a mains
socket. If the handset is turned on, "Charger
connect" displays for a few seconds, and the
battery symbol bars scroll to indicate that
charging has started. If the handset is turned
off, a battery symbol appears briefly with the
segments cycling to indicate charging has
started.
• Charging the battery may take up to 3 hours.
• If "Charger
disconnect and retry.
If charging still fails, contact the helpline.
• The battery is fully charged when the bars
within the battery symbol are continuously on.
Disconnect the charger from the phone and
the mains socket. "Charger removed" displays
briefly to indicate the charging has stopped.
connect" does not display,
12