Picture Setting; Setting The Video Output - Philips HTS8010S/01B User Manual

Dvd/sacd home theater system
Hide thumbs Also See for HTS8010S/01B:
Table of Contents

Advertisement

DVD Setup Menu Options

Picture Setting

This DVD system provides three
predefined sets of picture colour settings
and one personal setting which you can
define yourself.
1
In 'Video Setup Page', use 34 keys to
highlight { Picture Setting }, then press
2.
{ Standard }
Select this for original colour setting.
{ Bright }
Select this for vibrant colour setting.
{ Soft }
Select this for warm colour setting.
{ Personal }
Select this to personalise your picture colour
by adjusting the brightness, contrast, tint and
colour (saturation).
2
Use 34 keys to select a setting and press
OK to confirm.
3
If you select { Personal }, then proceed
4
7
to steps
~
.
The 'Personal picture setup' menu
appears.
Personal Picture Setup
Brightness
Contrast
Tint
Color
4
Use 34 keys to highlight one of the
following options.
{ Brightness }
Increase this value to brighten the picture
colour or vice versa. Choose zero (0) for the
average setting.
{ Contrast }
Increase this value to sharpen the picture
colour or vice versa. Choose zero (0) to
balance the contrast.
TIPS:
The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP MENU.
36
001-049 HTS8000S-00-Eng
(continued)
{ Tint }
Increase or decrease this value to change the
colour phase of the picture. Choose zero (0)
for the average setting.
{ Color }
Increase this value to enhance the picture
colour or vice versa. Choose zero (0) to
balance the colour.
5
Press 1 2 to adjust the setting that best
suit your personal preference.
6
Repeat steps
settings.
7
Press OK to confirm.

Setting the Video Output

Choose the type of video output that
matches the video connection between
the DVD system and your TV.
1
In 'Video Setup Page', use 34 keys to
highlight { Component }, then press 2.
{ YUV }
Select this if you have connected the DVD
system to your TV using component video
sockets (Y Pb Pr).
{ RGB }
Select this if you have connected the DVD
system to your TV using scart socket. The
factory default setting is RGB.
2
Use 34 keys to select a setting and press
OK to confirm.
36
4
5
~
to adjust other
3139 115 2xxx1
22/04/2005, 04:07 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hts8010s/01Hts8000sHts8010s

Table of Contents