Connect Power Cord; Attach Table Stand; Mount The Main Unit - Philips HTS6520/12 User Manual

Connect power cord

Warning
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
1
Connect the power cord to the power
outlet when all the required connections
are done.
»
This product is ready to be set up for
use.

Attach table stand

Align Arrow
With table Stand
Align Arrow
With table Stand
A = table stand bracket.
1
Ensure all the required cables are
connected to this Home Theater System
and close the rear cover.
2
Attach the table stand bracket to the rear
of this Home Theater System.
•
•

Mount the main unit

•
Risk of personal injury and damage to the
product. Allow only qualiÀ ed persons to
mount the product.
1
Ensure all the required cables are
A
connected to the main unit and close the
rear cover.
2
Attach the big wall mount bracket to the
table stand bracket with screws.
3
A
Position the brackets on the wall, drill
four screw holes and secure the brackets
onto the wall with screws (not supplied).
A
Align the arrow indicators for
correct positioning and placement.
Use the protrude panels to hold the
table stand bracket.
Caution
A
B
EN 15