Configuring Net Hdd - HIKVISION E Series User Manual

User Manual of E Series Network Mini PTZ camera
Uploading to FTP
Please make sure that the FTP server is online.
You can follow below configuration instructions to upload the snapshots to FTP.

Upload continuous snapshots to FTP
Steps:
1) Configure the FTP settings and check Upload Picture checkbox in FTP Settings interface.
Please refer to Section 6.3.8 Configuring FTP Settings for more details to configure FTP
parameters.
2) Check the Enable Timing Snapshot checkbox.
3) Click Edit to set the snapshot schedule. Refer to Step 2 Set the Arming Schedule for Motion
Detection in Section 6.6.1 Configuring Motion Detection.

Upload event-triggered snapshots to FTP
Steps:
1) Configure the FTP settings and check Upload Picture checkbox in FTP Settings interface.
Please refer to Section 6.3.8 Configuring FTP Settings for more details to configure FTP
parameters.
2) Check Upload to FTP checkbox in Motion Detection Settings or Alarm Input interface. Please
refer to Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1
Configuring Motion Detection, or Step 4 Configuring External Alarm Input in Section 6.6.1
Configuring Motion Detection.
3) Check the Enable Event-triggered Snapshot checkbox.

5.1.3 Configuring Net HDD

Before you start:
The network disk should be available within the network and properly configured to store the
recorded files, log files, etc.
Steps:
Add the network disk
1. Enter the NAS (Network-Attached Storage) Settings interface:
Configuration > Storage > Storage Management > Net HDD
© Hikvision
39