Programmable Features; User Programmable Buttons; Programming The Buttons - Motorola MTS 2000 Operation Manual

You Do
3. When you have finished the conver-
sation, press HOME to hang up.

Programmable Features

The following sections describe programmable features and options on the mo-
bile radio and microphone. Some of these features have been pre-programmed
via the radio's software. Other programmable buttons and features can be pro-
grammed by the user. This section will describe which buttons and features you
can change and present specific directions for doing so.

User Programmable Buttons

There are four user programmable buttons. Two of these buttons are located on
the face of the mobile radio and are labeled "Ø" and "OPT". The other two pro-
grammable buttons are the numbers "1" and "3" on the microphone keypad.
These buttons can be programmed to automatically change your Zone and
Talkgroup to a pre-determined location. For example, pressing the HOME button
always takes you to the A-1 Talkgroup. You can program the OPT button to go to
A-1, the Ø button to go to A-8 or any other frequently used Talkgroup. This fea-
ture prevents scrolling through with the Talkgroup/Zone selector control.

Programming the Buttons

You Do
1. Select the Zone and Talkgroup you
would like to program a button for.
2. Press the programmable button and
hold for approximately 2-3 seconds.
98 Section VI
The Mobile Radio Does
The radio will return to normal
operation.
The Mobile Radio Does
The display shows the Zone letter,
channel number, and Talkgroup
name.
You will hear one acknowledgement
beep.
Snohomish County PUD Radio Operations Manual • Rev. 6/03