Optional: Connecting To A Multi-Channel Receiver; Receiver Has A Dolby Digital Or Dts Decoder; Stereo System Has Dolby Pro Logic Or Right / Left Audio In Jack; Optional : Connecting To An Audio System - Philips DVP3000K/93 User Manual

Optional: Connecting to a Multi-
channel Receiver
AV Receiver
Receiver has a Dolby Digital or DTS
decoder
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
3
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4
Set the DVD Player's Analog Output to
'Multichannel' to enable playback of DVDs
recorded in Multi-channel. (see page 29
"Setting the analogue output").
Helpful Hint:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
01-41 DVP3000K_93_RC2
MULTICHANNEL AUDIO IN
CENTER REAR FRONT
R R
L L
SUBW. REAR FRONT
CENTER
DIGITAL
AUDIO
OUT
OUT
SUB-
WOOFER REAR FRONT
1
2
11
Connections
Optional: Connecting to an
Audio System
STEREO
CENTER
DIGITAL
AUDIO
OUT
OUT
SUB-
WOOFER REAR FRONT
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
Use the audio cables (white/red) to
connect [FRONT (L/R)] jacks of the DVD
Player to the corresponding AUDIO IN
jacks on the stereo system (cable
supplied).
26/09/05, 9:53 AM
AUDIO
IN
DIGITAL
VIDEO
OUT
CVBS
11