Maximizing Use Of The Product; Using A Service Requiring A Global Ip Address Within The Lan - Yamaha fwx120 Operation Manual

Hide thumbs Also See for fwx120:
Table of Contents

Advertisement

Chapter 6
Maximizing use of the product

Maximizing use of the product

Using a service requiring a global IP address within the LAN

When you attempt to use an application program that requires a global IP address from your LAN via the
product, the program may not operate correctly. You can solve the problem using either of the following
methods.
1. Registering the conversion table of protocol, port number and the host IP address. (Static IP masquerade).
2. U sing the DMZ host function.
1. Using the static IP masquerade setting to
solve the problem
By registering the IP address conversion table
(static IP masquerade) in advance, packets of a
specific protocol can be sent to a specific host
within the LAN.
Internet
1. Set the IP addresses of PCs.
Assign a fixed private IP address to the PC for
which you want to permit external access.
2. Register the IP address conversion
table.
In the "Register static IP masquerade" screen,
register the conversion table of protocol, port
number and the host IP address (Static IP
masquerade settings).
NOTE
• For information about the protocol and port number,
please refer to the manual of the software or service
to be used.
• So far as representative software programs are
concerned, you can click "Help" in the "Register
static IP masquerade" screen to confirm the port
number to be used and other setting examples.
Provider
If the incoming packet is for
communication port 9072, transfer
the packet to a host having IP address
"192.168.100.10".
For more details on the settings, click "Help" on the
setup screen and refer to the description displayed.
To open the "Register static IP masquerade"
screen
From "Basic configuration page", click the buttons
on the setup screen in the following order:
 "Advanced settings" in the top page
 "Configure" of "Detailed basic connection setting"
 "Configure" of the destination of which settings
you want to change from "Configured providers
list"
 "Add" in the "Static IP masquerade" field
FWX120 Operation Manual  129
192.168.100.190
192.168.100.191
192.168.100.10
6

Advertisement

Table of Contents
loading

Table of Contents