Bosch GWS Professional 7-100 Original Instructions Manual page 7

OBJ_BUCH-1474-005.book Page 7 Friday, November 27, 2015 1:20 PM
Symbol Meaning
Next step of action
P Rated power input
1
P Output power
2
n Rated speed
n Speed control adjustment
v
l = Grinder spindle length
d
1
d = Grinder spindle diameter
l 1
D = Max. grinding disc diameter
d
2
d = Inner disc diameter
D
2
Speed preselection
Additional information
Weight according to EPTA-Procedure
1
01/2003 with vibration-damping auxil-
iary handle
Weight according to EPTA-Procedure
2
01/2003 with standard-auxiliary handle
Symbol for protection class II
/II
(completely insulated)
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Grinding, preparation
Cutting, preparation
Cutting stone, brick and tiles, prep-
aration (recommendation)
Removing paint, preparation
Bosch Power Tools
Delivery Scope
Angle grinder, protection guard, auxiliary handle.
Special protection guards, application tools and other acces-
sories shown or described are not part of the standard deliv-
ery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for roughing metal, stone and ceram-
ic materials and for drilling tiles.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
Together with the hand guard (accessory), the machine can
be used for brushing and grinding/sanding with elastic sand-
ing plates.
The machine is suitable only for working without water.
Technical Data
The technical data of the machine are listed in the table on
page 53.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Figure Please observe
1
30°
2
3
4
English | 7
Page
54 – 55
56 – 57
58 – 59
60
1 609 92A 1UE | (27.11.15)