Connections - Philips DVD950/05 Instructions For Use Manual

AMPLIFIER
10
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
MAINS
OPT OUT
16 PREPARATION
1
TV
2
8
9
1
MULTICHANNEL AUDIO OUT
LEFT CENTER LEFT
REAR FRONT
STEREO OUT VIDEO OUT
2
RIGHT SUBW. RIGHT R L (CVBS) (Y/C)
DIG OUT REAR FRONT AUDIO VIDEO OUT S-VIDEO OUT
Analog connection to a multichannel A/V receiver with
6 CH connectors
This DVD player contains a multichannel decoder.This enables playback
of DVDs recorded in Multichannel Surround without the need for an
optional decoder.
Connect the audio outputs for Center speaker and Subwoofer connection
(9) to the corresponding inputs on your receiver.
Note: If the subwoofer is equipped with its own amplifier, the Subwoofer
connection should be connected to the subwoofer directly.
Connect the audio Left and Right outputs for Front speaker connection
(8) to the corresponding input sockets on your receiver.
Connect the audio Left and Right outputs for Surround speaker connec-
tion (10) to the corresponding inputs on your receiver.
Make the appropriate Sound settings for Analog Output and Speaker
Settings in the Personal Preferences menu.
Connecting to an amplifier equiped with Dolby
Surround™
Dolby Surround sound
Connect the player to the TV and connect the player's audio Left and
Right output sockets to the corresponding inputs on the Dolby
Surround™ Audio/Video receiver, using the audio cable supplied (4).
Make the appropriate Sound settings for Analog Output in the Personal
Preferences menu.
If your amplifier is equipped with a Dolby Digital™ decoder
Connect the player as described in chapter 'Connecting to an A/V
receiver with multi channel decoder'.
If your TV set is equipped with a Dolby Surround™ decoder
Connect the player to the TV as described in chapter 'Connecting to a TV'.