Connecting To A Tv Only - Philips DVD724 Owner's Manual

10 Hookups (cont'd)
2
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
VIDEO IN
1
Connect the yellow VIDEO (VIDEO OUT) jack of the DVD
Player to the corresponding VIDEO IN jack on your TV. Use
the supplied video cable.
2
Connect the supplied audio cable to one pair of the red and
white AUDIO OUT (left and right) jacks on the DVD Player
and to the left/right AUDIO IN jacks on the TV. Match the
cable colors to the jack colors.
3
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
4
Turn on the TV power. Set the TV to the correct Video In
channel. Such channels usually are near channel 00. See your TV
owner's manual for details. Or, change channels at the TV until you
see the DVD screen saver on the TV.

Connecting to a TV Only

TV has a yellow CVBS Video In jack
Back of TV
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1
Y
PB
PR
3
Helpful Hint
• On the TV, the Video In jack is
usually yellow and might be
labeled video, CVBS, composite,
or baseband.