Setting The Video Output - Philips DVD622 User Manual

Setting the Video Output

Choose the type of video output that
matches the video connection between
the DVD Player and your TV.
1
In 'VIDEO SETUP', press OK to enter the
submenu.
2
Press 3 4 to highlight {VIDEO
OUTPUT}, then press OK.
3
Press 34 to highlight one of the options
below:
S-VIDEO
Select this if you have connected the
DVD Player to your TV using S-Video
jack.
YPbPr
Select this if you have connected the
DVD Player to your TV using component
video output jack.
4
Select an item and press OK.
TIPS: To return to the previous menu, press
To remove the menu, press
01-36 DVD622_372
DVD Setup Menu Options
Progressive – turning on/off
This feature is only applicable if you have
connected this DVD Player to a
Progressive Scan TV through the Y Pb Pr
jacks (see page 11).
1
In 'VIDEO SETUP', press OK to enter the
submenu.
2
Press 3 4 to highlight {PROGRESSIVE},
then press OK.
3
Press 3 4 to highlight one of the options
below:
ON
To enable Progressive Scan function.
OFF
To disable Progressive Scan function.
4
Select an item and press OK.
OK
.
SYSTEM MENU
27
.
3139 246 14871
18/01/2005, 2:21 AM
27