17. Follow instructions for wall, shelf or ceiling mounting as recommended by
the manufacturer.
18. An outdoor antenna should not be located near overhead power lines or
any electrical circuits.
19. If an outside antenna is connected to the receiver, confirm that the
antenna system is grounded to protect against voltage surges and built
up static charges. Section 810 of the National Electric Code, ANSI /
NFPA No. 70-1984, provides information with respect to proper grounding
for the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding connectors, location of antenna
discharge unit, connection to grounding electrodes and requirements for
the grounding electrode.
20. Rest your eyes periodically by focusing on an object at least 5 feet away.
Blink often.
21. Do not place any heavy objects on the power cord.
Damage to the cord may cause shock or fire.
22. Do not use monitor in high temperature, humid, dusty, or oily areas.
23. Do not bend, crimp or otherwise damage the power cord.
24. Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
NOTE: To the TV system installer: This reminder is provided to call attention
to Article 820-44 of the National Electric Code that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the facility, as reasonably close to the
point of cable entry as possible
English-3