Desktop Mounting Instructions; Connecting The Telephony Modem - Arris Touchstone TM822G User Manual

4. Slip both mounting slots in the back of the Telephony Modem over the screws, then slide
the case down until the narrow end of the keyhole slot contacts the screw shaft.
5. Proceed to

Desktop Mounting Instructions

1. Position the Telephony Modem so that:
•
air flows freely around it
•
the back faces the nearest wall
•
it will not fall to the floor if bumped or moved
•
the ventilation holes on the sides of the unit are not blocked
2. Proceed to

Connecting the Telephony Modem

WARNING
Risk of injury or equipment damage
Connecting the Telephony Modem to the home's existing telephone wiring should only be
performed by a professional installer. Physical connections to the previous telephone provider
must be removed and the wiring must be checked; there must not be any voltage. Cancelation
of telephone service is not adequate. Failure to do so may result in loss of service and/or
permanent damage to the Telephony Modem.
Release 8 STANDARD 1.3 August 2016
© 2011-2016 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 5: Installing and Connecting your Telephony Modem
Connecting the Telephony Modem
Connecting the Telephony Modem
(page 28).
(page 28).
Touchstone TM822G Telephony Modem User Guide
28