Contents 8 Troubleshooting 1 Important Safety 9 Notice Declaration of conformity 2 Your Micro Music System Written offer Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect FM antenna Connect power Prepare the remote control Set clock...
1 Important the disconnect device shall remain readily operable. • Make sure that there is enough free space around the product for ventilation. Safety • Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: •...
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, Bluetooth-enabled devices, USB storage devices, or other external devices;...
Overview of the main unit g h i a GROUP button/indicator • Press and hold to group with another • Skip to the previous or next title, chapter, track, or file. izzylink-compatible multiroom speaker. • Search within a track/disc. • Press to exit or return to a group.
d Keys for basic playback control • Headphone socket. • Start, pause, or resume play. o AUDIO IN • Audio input socket(3.5mm) for an • Stop play or erase a program. external audio device. • Skip to the previous or next title, chapter, track, or file.
Page 8
o FM/AUDIO IN • Press repeatedly to select the FM or AUDIO IN source. PAIRING • Press to select the BT (Bluetooth) source. • In Bluetooth mode with two devices connected, press and hold for three seconds to disconnect the device that is not playing, and then enter pairing mode.
3 Get started Connect FM antenna Caution • For optimal reception, fully extend and adjust the position of the antenna. • Use of controls or adjustments or performance of • For better FM stereo reception, connect an outdoor procedures other than herein may result in hazardous FM antenna to the FM AERIAL socket.
Press to select 'SYNC ON' Prepare the remote control or 'SYNC OFF' and press CLOCK to confirm. Caution » If you have selected 'SYNC ON' , • automatic clock synchronization starts Risk of product damage! When the remote control is not used for long periods, remove the batteries.
4 Play Press USB to select the USB source. Insert a USB device into the socket. » Playback starts automatically. If not, press Play in single mode Single mode: Single mode means that the speaker is not grouped with any other izzylink- compatible multiroom speakers.
Program tracks You can program a maximum of 20 tracks. Stop play, and then press PROGRAM to activate programming mode. For MP3 tracks, press ALBUM/PRESET to select an album. Press to select a track, and then press PROGRAM to confirm. Repeat steps 2-3 to program more tracks.
» The radio tunes to a station with » Music streams from your Bluetooth strong reception automatically. enabled device to this unit. If you fail to search for 'Philips BM60 • Repeat step 2 to tune to additional xxx' or cannot pair with this unit, stations.
You can create a group of up to five speakers, with one as the master and four as slaves. • In the illustrations below, BM5 (as shown on the right of each illustration) is taken as an example for grouping with BM60.
Page 15
In Bluetooth mode, music play pauses when there is an incoming call or video recording is in progress on the connected mobile phone. • If this speaker (BM60) acts as the master, select a source and play to the whole group of speakers. Change master You can change the current master in a group easily.
Page 16
A Press GROUP on the master to enter • Press any source key on a slave speaker to change it to be the master of the group. single mode. » The slaves keep looking for the master until timeout in 15 minutes. Note »...
5 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect Press SOUND repeatedly to select a • preset sound effect. Balance, Clear, Powerful, Warm, and • Bright. Adjust volume level On the remote control, press +/- •...
6 Other features Set the sleep timer Press SLEEP/TIMER to set the number of • minutes before the unit automatically turns off: [SLP 120] • Set the alarm timer • [SLP 90] [SLP 60] • This unit can be used as an alarm clock. You •...
On your PC/Mac, go to www.philips.com/ support. Enter the model number to find the latest firmware upgrade files available. www.philips.com/support AUDIO IN Unzip and save the upgrade files to the Listen through a headphone root directory of a USB stick.
7 Product Speakers information Speaker Impedance 6 ohm Speaker Driver 2 x 100mm Woofer, 20mm Tweeter Sensitivity 83 ± 3dB/m/W Note • Product information is subject to change without prior Bluetooth notice. Bluetooth version V2.1 +EDR Bluetooth frequency 2.402GHz ~ 2.48GHz band ISM Band Specifications...
No disc detected requesting service. If the problem remains • Insert a disc. unsolved, go to the Philips Web page (www. • Check if the disc is inserted upside down. philips.com/support). When you contact Philips, •...
Page 23
• This unit is not in pairing mode. • This unit is already connected with another Bluetooth-enabled device. Disconnect that device and then try again. The paired mobile device connects and disconnects constantly. • The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them.
Directive 1999/5/EC. You can find the Declaration of Conformity on www.philips.com/ support. Disposal of your old product and battery This item incorporates copy protection technology that is protected by U.S. patents...
Open Source Team, Gibson Innovations Limited, 5/F Philips Electronics Building, 5 Science Park East Avenue, Hong Kong Science Park, Shatin, N.T. Hong Kong.