Configuration Examples - NEC Express5800/120Rd-2 Service Manual

3-4 Configuring Your System

Configuration Examples

The following describes examples of configuration changes required to use the software-link
features or for system operations.
Date and Time
To display system date or time
Select [Main] - [System Time], [System Date].
Link with Management Software
To link with the temperature monitoring feature of ESMPRO
Select [Server] - [Temperature Sensor] - [Enabled].
To control the power supply of the server with ESMPRO Manager via the network
Select [Advanced] - [Advanced Chipset Control] - [Wake On Lan] - [Enabled].
UPS
To link the server power supply with the UPS
To power on the server after a power failure when power is supplied from the UPS
!
Select [Server] - [After Power Failure] - [Power On].
To keep the server powered off after a power failure when power is supplied from the
!
UPS, if the POWER switch was used to power off the server
Select [Server] - [After Power Failure] - [Last State].
To keep the server powered off after a power failure when power is supplied from the
!
UPS
Select [Server] - [After Power Failure] - [StayOff].