Table of Contents
Advertisement
6.1.3.1
Setting Emergency Messaging Notification Settings
Access to Emergency Messaging notification settings may be available through the Emergency
settings on the device. Preference settings allow the user to configure options for receiving Emergency
notifications on the device.
Prerequisites: Additional applications provided from Motorola Solutions are required to configure
Emergency Notifications on the LEX device. If you are unable to configure Emergency audio
notification settings on the LEX device, contact your device technician.
When and where to use:
Follow this procedure to set emergency messaging notifications on the device. If you are unable to
configure Emergency notifications for Messaging on the device, contact your device technician.
Procedure:
1 From the device screen, pull down the Notification Bar and tap Emergency icon.
2 Tap Admin Emergency Settings bar.
Figure 39: Admin Emergency Messaging Settings
Table 9: Emergency Messaging Settings
Send Message
Repeat Emergency Location Report
Repeat Emergency Message
Message Repeat Interval (seconds)
Send Feedback
Chapter 6: Emergency Services
Name
Tap slider to enable or disable Send
Message.
If Send Message is enabled, tap check-
box to enable Emergency Location Re-
port repeat.
Tap checkbox to enable emergency re-
peat.
If Repeat Emergency messageis ena-
bled, tap slider bar to set interval time in
seconds.
MN003477A01-A
Table continued...
99
Advertisement
Table of Contents
Troubleshooting
