8Eyt-Ess/Ul, Fx 2N -16Eyt-Ess/Ul (Transistor Output); Product Specifications - Mitsubishi FX3G SERIES User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
16.9 FX -8EYT-ESS/UL, FX
2N

16.9.1 Product specifications

The generic specifications are identical to the main unit specifications.
For external wiring, refer to the following chapters.
1. Power supply specifications
Item
Product type
Rated voltage
2. Weight and Other specifications (External dimensions are described later.)
Item
MASS (Weight)
Other
3. Output specifications (Transistor output type)
Item
Output Points
Connection type
Output unit/type
External power supply
Output circuit insulation
Indication of output operation
Max. load
Open circuit leakage current
Min. load
Response time
Output circuit configuration
234
-16EYT-ESS/UL (Transistor Output)
2N
24V DC (supplied from main unit and input/output powered extension unit)
• The extension cable is already connected to the extension block.
• Accessories: Label for indication of input/output number
• The DIN46277 rail (width: 35 mm (1.38")) or direct installation.
The total load current per common should be as follows:
Resistance load
• 4 output points/common: 0.8A or less
• 8 output points/common: 1.6A or less
Inductive load
OFF ON
ON OFF
16.9 FX2N-8EYT-ESS/UL, FX2N-16EYT-ESS/UL (Transistor Output)
→ Refer to Section 4.1 for generic specifications.
→ Refer to Chapter 12 for output wiring.
FX -8EYT-ESS/UL
2N
FX
2N
FX -8EYT-ESS/UL
2N
0.2kg (0.44lbs)
FX -8EYT-ESS/UL
2N
8 points
Vertical terminal block (M3 screws)
Transistor/source output
5 to 30V DC
Photo-coupler insulation
Activation of the photo-coupler will light the LED indicator lamp on panel.
0.5A/point
12W/24V DC
0.1mA/30V DC
0.2ms or less for 200mA (at 24V DC)
0.2ms or less for 200mA (at 24V DC)
Load
Y
Fuse
+V
DC power
supply
A common number applies to the
16 Input/Output Extension Blocks
FX -16EYT-ESS/UL
2N
extension block
FX -16EYT-ESS/UL
2N
0.3kg (0.66lbs)
FX -16EYT-ESS/UL
2N
16 points
-
of [+V ].