Using The Installation Features - Philips AV2 Quick Use And Setup Manual

Language
When you plug in your TV for the first time it will prompt
you to set the Language and Autoprogam the channels.
For Spanish- and French-speaking TV owners, an on-screen
Language option is present. The Language control enables
you to set the TV's on-screen menu to be shown in either
English, Spanish, or French.
Press the Cursor Down button to select English, Español
1
(Spanish), or Francais (French).
After you have made your language selection, press the
2
OK button to confirm your selection.
Press the MENU button to remove the on-screen menu
3
from the TV screen or continue with Autoprogramming
below.
H
ELPFUL
Remember, the Language control makes only the TV's on-
screen Menu items appear in English, Spanish, or French text.
It does not change the other on-screen text features, such as
Closed Captioning (CC), with TV shows.
Autoprogram
Your TV can automatically set itself for local area (or cable
TV) channels. This makes it easy for you to select only the
TV stations in your area by pressing the CH + or – button
on the remote control.
Press the Cursor Down button to select "Install" mode
1
control.
Press the Cursor Right button to display a list of Install
2
mode options: "Antenna," "Automatic," "Cable."
Press the Cursor Up or Down button to select one of the
3
options. Select "Antenna" for normal outside- or inside-
type antenna. Select "Cable" for a cable company sup-
plied signal. When "Automatic" is selected, the TV will
automatically set the mode based on the type of signal it
detects coming into the TV. The programming process
may be faster if you choose the specific type of connec-
tion you have made, either Antenna or Cable.
Press the Cursor Left button after making your "Install"
4
mode selection.
Press the Cursor Down button to select "Install."
5
Press the Cursor Right button to start the programming
6
process.
Press the Menu button to remove the on-screen menu from
7
the TV screen when the Autoprogramming process has fin-
ished.
H
ELPFUL
After Autoprogram is finished, check the results. Press the CH
(+) or (–) button on the remote control to see which channels
you can select. See page 51 in the Directions for Use manual
for instructions on removing channels.

Using the Installation Features

2
1
H
INT
4
2
3
5
H
INT
Language
English
Français
Español
Language
3
English
OK
Français
Español
Language
ACITVE
SOUND CONTROL PICTURE
English
1 2
Français
ZOOM
Español
Autoprogram
Install mode
Install
2
6
Autoprogram
Install mode
Install
1
7
Autoprogram
Install mode
ACITVE
SOUND CONTROL PICTURE
Install
1 2
ZOOM
To Autoprogram Analog channels, press the right arrow.
8
Autoprogram
Press the cursor down to select
your menu language
Autoprogram
Select your menu language with
the cursor up/down.
Press the OK key on the remote
control to confirm.
Autoprogram
The language you have chosen is
English
The TV will search for, find and store
Install mode
all the available channels.
Press the cursor down to proceed.
Antenna
Automatic Install mode
Cable
Install
Install mode
Start Install
24 analog channels found
Install mode
Install
60 analog channels found
Autoprogramming is complete
Autoprogram
Keep the prede-
Automatic
fined automatic
detection of
Install
cable or anntenna
or make your own
selection.
Autoprogram
Automatic
Autoprogram
Searching
Autoprogram
Start