Rear Jack Panel Connections - Philips 27HT4000D User Manual

* WARNING :
- Risk of electric shock. Rear jack panel must be removed by qualified personnel only.
- Do not connect telephone cable or equipment to SmartPlug (RJ-12) connector.
RJ12

REAR JACK PANEL CONNECTIONS

Monitor
Out
Y
Video In
Component
Ext Spkr
Video Input
Audio
Pb
L
L
Pr
R
Smart Plug R
Applicable to 27HT7210D/27 only
Monitor
Out AV1 in AV2 in
Y
Pb
L L
Pr
R R
Applicable to 27HT4000D/27 only
Plug (R Plug (RJ-12) connector.
SmartCard slot
& cover
Note :
1. Do not connect Video In and S-Video simulta-
neously.
2. When a Smart Card with Audio/Video and S-
Video inputs are installed into the Smart Card
slot, the inputs on the Smart Card cannot be
connected concurrently with the Video In or S-
Video and Audio L/R In of the TV set or vice
versa. In this case, you can only use either
the inputs on the Smart Card or TV set.
S-VIDEO
3.
When connecting Y Pb Pr inputs to the
27HT4000D/27, please note that the correct Audio-
In connectors should be the Red & White jacks
under the label AV2 In, and not under AV1 In.
S-VIDEO
7