Management Port; Maintenance Port - Hitachi CBXSS Hardware Service Manual

Management port

All Controller Boxes provide a 10/100/1000 Ethernet RJ-45 management
port labeled LAN 1. This port is a 10BaseT/100Base-TX/1000BaseT
Ethernet management interface that connects to a PC that will be used to
configure the storage system using Storage Navigator Modular 2 software.
The management port supports Auto-MDI/MDIX technology, allowing you to
use either standard (straight-through) or crossover Ethernet cable. It also
has port activity and link status LEDs that indicate its status.
•
Legend
¶
?

Maintenance port

All Controller Boxes provide a 10/100/1000 Ethernet RJ-45 maintenance
port labeled LAN 0. This port is used to perform troubleshooting
procedures. Do not use this port unless instructed by Hitachi Customer
Service. This port has port activity and link status LEDs that indicate its
status.
•
Legend
¶
?
¶
LED Color
ACT LED Yellow
LINK LED Green
¶
LED Color
ACT LED Yellow
LINK LED Green
Hardware description
Hitachi Unified Storage Hardware Service Guide
?
Description
OFF = data is not being sent or received on the
port.
ON = data is being sent or received on the port.
OFF = link status error. Visit the HDS Support
Portal at portal.hds.com.
ON = link status is normal.
?
Description
OFF = data is not being sent or received on the
port.
ON = data is being sent or received on the port.
OFF = link status error. Visit the HDS Support
Portal at portal.hds.com.
ON = link status is normal.
2–37