Philips 150S Electronic User's Manual page 34

Troubleshooting
An after-image appears
An after-image remains after the power has been
turned off.
Green, red, blue, dark, and white dots remains
For further assistance, refer to the
distributor.
file:///D|/Philips LCD/english/150S/SAFETY/saf_troub.htm (3 of 3) [1/20/2001 3:12:36 PM]
Consumer Information Centers
RETURN TO TOP OF THE PAGE
If an image remains in the
screen for an extended period
of time, it may be imprinted in
the screen and leave an
after-image. This usually
disappears after a few hours
This is characteristic of liquid
crystal and is not caused by a
malfunction or deterioration of
the liquid crystal. The
after-image will disappear
after a set amount of time
The remaining dots are
normal charactericstic of the
liquid crystal used in today's
technology.
list to contact your local Philips