Honda CR-V 2017 Owner's Manual page 94

uuIndicatorsu
Indicator Name
Security System
Indicator
Alarm Indicator
Blind spot
information (BSI)
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Canadian models only: Apply and hold the brake pedal before turning the ignition on.
* Not available on all models
92
On/Blinking
Blinks when the security system
●
alarm has been set.
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Stays on while BSI is turned off.
●
Comes on when mud, snow, or ice
●
accumulates in the vicinity of
*
sensor.
Comes on if there is a problem
●
with the system.
Explanation
2 Security System Alarm
—
Comes on while driving - Remove the
●
obstacle in the vicinity of sensor.
2 Blind spot information (BSI) System
P. 497
Comes on while driving - Have your
●
vehicle checked by a dealer.
Message *
—
* P. 161
*