Programming
The activation, deactivation and choice of
welcome lighting duration are done in the touch
screen tablet.
In the Driving menu, select the "Settings"
tab then "Lighting" and select "Welcome
lighting".
Use the arrows or the cursor to adjust the
duration of the lighting.
Direction indicators
F Left: lower the lighting stalk passing the
point of resistance.
F Right: raise the lighting stalk passing the
point of resistance.
Three flashes of the direction
indicators
F Press briefly upwards or downwards,
without going beyond the point of
resistance; the direction indicators will
flash 3 times.
Lighting and visibility
Adjusting the headlamp
beam height
To avoid causing a nuisance to other road
users, the headlamps should be adjusted
according to the load in the vehicle.
0. 1 or 2 people in the front seats.
-. Intermediate setting.
1. 5 people + maximum authorised load.
-. Intermediate setting.
2. Driver + maximum authorised load.
-. Intermediate setting.
3. 5 people + maximum load in the boot.
The initial setting is position "0".
5
215