Figure 5-57 Bundling The Line Cord; Figure 5-58 Plugging In Line Cord; Wall Mounting The Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
4.12.1.2

Wall Mounting the Multiline Terminal

1. Plug line cord in the wall receptacle. Leave about
eight inches of cord and bundle the rest as shown in
Figure 5-57 Bundling the Line

Figure 5-57 Bundling the Line Cord

2. Ensure the Tilt Legs are in the flat (unused position).
3. Plug the line cord into the multiline terminal as
illustrated in
4. Align the two holes on the back of the multiline
terminal with the two screws on the wall plate and
slide downward (refer to
Terminal Wall on Wall Plate on page
Figure 5-58 Plugging in Line

Figure 5-58 Plugging in Line Cord

Figure 5-59 Mount Multiline
Issue 9.0
Cord.
Cord.
5-60).
5 - 59