Record Set Item - JVC KY-PZ100WU Instructions Manual

Install Position
For selecting the location to install the camera.
Desktop:
0
When the camera is mounted on top of a table
or to a tripod. The output image is not inverted
vertically or laterally.
Hanging:
0
When the camera is mounted to the ceiling. The
output image will be inverted both vertically and
laterally.
[Setting Values: RDesktop, Hanging]
System Information
9 Version
Displays information on the firmware version.
9 DIP SW
Displays the status of the DIP switch on the bottom
surface of the camera.
Left DIP SW 1 to Left DIP SW 8:
0
[Displayed Value: On, Off]
Right DIP SW 1 to Right DIP SW 7:
0
[Displayed Value: On, Off]
Memo :
The On/Off setting cannot be altered in the
0
menu. Turn on/off the DIP switch manually.
(A P23 [DIP Switch Setting] )
9 Open Source License
Displays the license for the open source software
used by this camera recorder.

Record Set Item

Frame Rate
System Mode
1080/60
1080/50
720/60
720/50
Memo :
The selectable options for Frame Rate vary
0
according to the [System Mode] setting.
Bit Rate
System
Frame Rate
Mode
1080/60 60p
1080/50 50p
1080/60 60i
1080/50 50i
1080/60 30p
1080/50 25p
720/60 60p
720/50 50p
720/60 30p
720/50 25p
Memo :
The selectable options for Bit Rate vary
0
according to the [System Mode] and [Frame
Rate] settings.
Setting Value
(R: default value)
60p, R60i, 30p
50p, 50i, 25p
60p, 30p
50p, 25p
Setting Value
(R: default value)
50M, 28M
50M, R35M, 18M,
5M
50M, 35M, 18M
35M, 18M
18M, 5M
System Menu
67