Installation Specifications - Fujitsu SCANSNAP S1300I Operator's Manual

Installation Specifications

The following table summarizes the installation specifications of the ScanSnap.
Item
Outer dimensions
(Width × Depth × Height)
Weight
Input power
Power
consumption
Temperature/
humidity
allowable ranges
284 mm (11.2 in.)
Voltage Power cable
connection
USB bus power
cable connection
Phase
Frequency range
Power cable connection
USB bus power cable
connection
Temperature
Humidity
434
Specification
Minimum: 284 X 99 X 77 (mm)/11.2 X 3.9 X 3.1 (in.)
(when the ADF paper chute (cover) is closed)
Maximum: 284 X 231 X 240 (mm)/11.2 X 9.1 X 9.4 (in.)
(when the ADF paper chute (cover) is open and the
extension is extended)
1.4 kg (approx. 3.09 lb)
100 to 240 V
5 V (the computer must have two USB ports: one for
power connection and one for USB cable connection)
Single phase
50/60 Hz
During operation: 9.0 W or less
During standby: 3.2 W or less
During operation: 5.0 W or less
During standby: 2.0 W or less
During operation: 5 to 35°C / 41 to 95°F
During standby: -20 to 60°C / -4 to 140°F
During storage/transportation: -20 to 60°C / -4 to 140°F
During operation: 20 to 80%
During standby: 8 to 95%
During storage/transportation: 8 to 95%
231 mm (9.1 in.)

Installation Specifications

240 mm
(9.4 in.)