Replacing Drum Cartridges - Sharp AL-1035-WH Operation Manual

REPLACING DRUM CARTRIDGES

Please replace the drum cartridge according to the following steps.
1
Open the cover of the machine and
remove the toner cartridge.
2
Hold the green-marked position with
your both hands and rotate in the
direction of the arrow, and take out
the old drum cartridge.
Do not touch the surface of the drum (green
Caution
portion) of the drum cartridge when replacing
the drum cartridge. Doing so may damage the
drum and cause smudges on copies.
3
Aim the new drum cartridge to the
bayonet of the machine, insert it into
the bayonet, rotate in the direction of
the arrow and insert the drum
cartridge until a "click" is heard.
4
Insert the toner cartridge into the
bayonet of the machine, press it down
in the direction of the arrow until a
"click" is heard. Gently lift support bar
at the green-marked and pull to a
half-closed postion, and then gently
lift the bar again until the cover is
completely closed.
Before closing the cover, make sure that the
Note
new drum cartridge is correctly installed.
5
Turn on the power, press the
[DENSITY] key and [PHOTO MODE]
key at the same time until all
indicators except for [PHOTO MODE]
indicator light on.
6
Press the [DENSITY] key again until
the indicatiors return to normal status.
Confirm whether the indicator of the
drum cartridge is light off.
46