STEP 9: Connect the AC adapter (
When a power supply HUB is used, the AC adapter is not used.
Note 1:
STEP 10: Attach the removed cover again.
AC adapter plug
AC adapter: Voltage 15 V, Current 1.2 A
STEP 11: Mount the IP-BS to the mounting tab.
STEP 12: Adjust antenna angle so that the antenna may be vertical with the ground.
When mounting on a wall
Since the antenna is easily broken, handle it with care.
Note:
STEP 13: Turn ON the power to the IP-BS to confirm the lamp indications are normal.
LAMP INDICATION
GREEN
RED
ON
-
-
ON
) to the socket of the IP-BS.
Note 1
Connection of LAN Cable and AC Adapter
IP-BS
AC adapter
ACV plug
AC adapter jack
Adjustment of Antenna
When mounting on a ceiling
90
STATE
Normal
Make-Busy
When mounting behind a ceiling
90
Cancel the make-busy state.
VOL.2-4
IP-BS (BS301)
90
REMARKS
-