Operation - Craftsman 151.74946 Operator's Manual

BATTERY PACK AND CHARGER
BATTERY LED INDICATORS
Check the battery pack capacity by pressing
the LED button.
When the LED button is pressed, the number
of illuminated lights indicates the state of
battery pack capacity. See Table below.
NUMBER of LIGHTED LEDs
LED yellow
Button
green
STARTING/STOPPING THE SWEEPER
See Figure 6, page iii
■ To start the sweeper, place the power
switch in the ON ( I ) position.
■ To stop the sweeper, place the power
switch in the OFF (O) position.
USE THE SWEEPER
See Figure 7, page iii
■ Blow debris or grass clippings off of
driveways, sidewalks, patios, parks, parking
lots, etc.
CAPACITY
0%-25%
25%-50%
50%-75%
75%-100%
red

OPERATION

12 ― English
SAFETY NOTES AND PRECAUTIONS
■ Do not disassemble the battery.
■ Keep away from children.
■ Do not expose the battery to water or salt
water. You should place the battery in a cool
and dry environment.
■ Do not place the battery in high-
temperature locations, such as fire or heater.
■ Do not reverse the positive terminal and the
negative terminal of the battery.
■ Do not connect the positive terminal and
the negative terminal of the battery to each
other with any metal objects.
■ Do not knock or strike the battery, nor step
on it.
■ Do not solder directly onto the battery or
pierce the battery with nails or other edge
tools.
■ In the event that battery leaks and fluid gets
into your eyes, do not rub the eyes. Rinse
well with water. Immediately discontinue use
of the battery if it emits an unusual smell,
feels hot, changes color, changes shape, or
appears abnormal in any other way.
■ Gather grass clippings, straw, or leaves into
piles. Remove debris from comers, around
joints, and between bricks.
NOTE: Your Craftsman sweeper is designed
to sweep and clean hard surfaces; such
as patios, driveways, decks, garages and
sideways.