Samsung ST76 Service Manual
Hide thumbs Also See for ST76:

Advertisement

DIGITAL CAMERA
SAMSUNG ST76/ST77/ST78/ST79
ST76VE/ST77VE
SERVICE
Manual
DIGITAL CAMERA
CONTENTS
1. Repair information
2. Product specifications
3. Disassembly and reassembly
4. PCB diagrams
5. Block diagram
6. Firmware update
7. Adjustment
8. ST77/ST76 Exploded view and parts list
9. ST77VE/ST76VE Exploded view and parts list

Advertisement

Table of Contents
loading

Summary of Contents for Samsung ST76

  • Page 1 SERVICE Manual DIGITAL CAMERA CONTENTS 1. Repair information 2. Product specifications 3. Disassembly and reassembly 4. PCB diagrams 5. Block diagram 6. Firmware update 7. Adjustment 8. ST77/ST76 Exploded view and parts list 9. ST77VE/ST76VE Exploded view and parts list...
  • Page 2: Table Of Contents

    Contents 1. Repair information 1-1 Customer satisfaction statement ..........1-1 1-2 Warranty and repair service information ........1-1 1-3 Precaution for disassembly and reassembly ......1-4 2. Product specifications 2-1 Specifications ................2-1 2-2 Product comparison ..............2-2 2-3 About the memory card ............2-3 2-4 About the battery ..............
  • Page 3 7-8 OIS centering ADJ ..............7-9 7-9 Backlash ADJ ................ 7-10 7-10 Serial number writing process ..........7-11 8. ST77/ST76 Exploded view and parts list 8-1 BODY ASSEMBLY ..............8-1 8-2 CHAMBER ASSEMBLY ............8-2 8-3 TOP PCB ASSEMBLY .............. 8-3 8-4 FRONT COVER ASSEMBLY .............
  • Page 4: Repair Information

    In the event that a valid date of purchase is not available, the warranty period will be determined by the date of manufacture. The warranty period shall be decreased to three months from the original product manufactured date. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 5 Our liability under this warranty shall be limited to the following: a. In the event of a same malfunction problem within two months after repair service by Samsung authorized technician, we will repair or replace free of charge the component of the product which is found to be defective.
  • Page 6 Defect occurring after the expiration of the Warranty Period. b. Damage due to negligence, immersion in water, impact, loss and tampering. c. Repair or alteration performed by any party other than Samsung authorized technicians. d. Misuse or other improper use of the power button.
  • Page 7: Precaution For Disassembly And Reassembly

    Use an anti-static mat as well as an anti-static wrist strap to avoid ESD damage to PCB. The use wooden or plastic tweezers is recommended for manual placement. CONNECTOR Metal tip tweezer might make marks or damage. BARREL Always follow proper direction while assembling the components of the barrel. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 8: Product Specifications

    • Tele: 0.5–1.6 m (ISO Auto) ISO Range Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200 Samsung Lens f = 4.5–22.5 mm Focal Length (35 mm film equivalent: 25–125 mm) • Internal memory: Approx. 70 MB •...
  • Page 9: Product Comparison

    ISO 800, ISO 1600, ISO 3200 400, ISO 800, ISO 1600, ISO 3200 Focal Samsung Lens f = 4.5–22.5 mm Samsung 5X Zoom Lens f = 4.7 - 23.5 mm Samsung Lens f = 4.7 mm-23.5 mm Length (35 mm film equivalent: 25–125 mm)
  • Page 10: About The Memory Card

    Approx. 61' 13" * The figures above are measured without using the zoom function. Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 11: About The Battery

    Approx. 105 min Record videos at resolution and 30 FPS. • The figures above are measured by Samsung’s standards. Your results may differ, depending on your actual usage. • Several videos were recorded in succession to determine the total recording time.
  • Page 12: Disassembly And Reassembly

    <Table. 3-1 Screw Information> PAGE NO. TYPE CODE SCREW MACHINE 6001-002166 SCREW MACHINE 6001-002152 SCREW MACHINE 6001-002166 3-10 SCREW TAPTYPE 6003-001369 3-11 SCREW TAPTYPE 6003-001630 3-12 SCREW TAPTYPE 6003-001369 3-28 SCREW TAPTYPE 6003-001369 3-29 SCREW TAPTYPE 6003-001630 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 13: Disassembly Of Main Unit

    (a) Remove the two SCREWs on the left side. SCREW MACHINE(6001-002166) Fig. 3-1 (b) Remove the two SCREWs on the right side. SCREW MACHINE(6001-002152) Fig. 3-2 (c) Remove the one SCREW on the bottom side. SCREW MACHINE(6001-002152) Fig. 3-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 14 (d) Run a safe open pry tool around the join of LOCKING PART to release the BACK COVER as illustrated in image. Slightly wiggle the LOCKING PART to widen the gap. You'll have to apply a little force to remove it. Fig. 3-4 (e) Remove the BACK COVER ASSY. BACK COVER ASSY Fig. 3-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 15 (a) Lift up the KEY PCB ASSY in the direction of the arrow and remove it. KEY PCB ASSY Fig 3-6 (b) Remove the CONNECTOR as indicated " Fig. A" below. Remove the FPCB from the connector. FPCB Fig. A Fig 3-7 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 16 (a) Remove the CONNECTOR as indicated " Fig. A" below and Then remove the LCD ASSY. Remove the FPCB from the connector. LCD ASSY FPCB FPCB Fig. A Fig 3-8 4. Disassembly of MAIN FRAME. Remove the two SCREWs. SCREW MACHINE Fig 3-9 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 17 MAIN FRAME Fig 3-10 5. Disassembly of BARREL ASSY and MAIN PCB ASSY. (a) Remove the CONNECTOR as indicated " Fig. A" below.. Remove the FPCB from the connector. FPCB FPCB Fig. A Fig 3-11 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 18 (b) Remove the BARREL ASSY/ASSY MAIN PCB. BARREL/MAIN PCB ASSY Fig 3-12 (c) Remove the CONNECTOR as indicated " Fig. A" below. Remove the FPCB from the connector. FPCB FPCB Fig. A Fig 3-13 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 19 Disassembly and reassembly (d) Remove the BARREL ASSY with MAIN PCB. BARREL ASSY MAIN PCB ASSY Fig 3-14 6. Disassembly of TOP PCB ASSY. (a) Remove the CHAMBER ASSY. CHAMBER ASSY Fig 3-15 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 20 (b) Discharge. CAUTION It must be processed for discharge to the main condenser as shown in the below picture. Discharging Fig 3-16 (c) Remove the two LOCKs from the TOP PCB ASSY. Fig 3-17 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 21: Disassembly Of Barrel

    (d) Remove the TOP PCB ASSY. TOP PCB ASSY Fig 3-18 3-3 Disassembly of barrel 1. Disassembly of PCB FPC-CCD ASSY. (a) Remove the three SCREWs from the PCB FPC-CCD ASSY. SCREW-TAPTYPE Fig 3-19 3-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 22 Disassembly and reassembly (b) Remove the PCB FPC-CCD ASSY. PCB FPC-CCD ASSY Fig 3-20 2. Disassembly of BARREL FPCB. (a) Remove the five SCREWs. SCREW-TAPTYPE SCREW-TAPTYPE SCREW-TAPTYPE Fig 3-21 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-11 3-11...
  • Page 23 (c) Remove the FPCB from the CONNECTOR as indicated "Fig. A" below. (d) Remove the fixed part by slightly move the FPCB as shown in the "Fig.B". Remove the FPCB from the connector. FPCB FPCB Fig. A Fig. B Fig 3-23 3-12 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 24 Make the BARREL by state of WIDE as illustrated and then remove the FPCB. Be damage the FPCB If state to CLOSE of BARREL when remove the FPCB. WIDE ⓐ Fig 3-25 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-13 3-13...
  • Page 25 Disassembly and reassembly (c) Remove the BARREL BASE. BARREL BASE Fig 3-26 (d) Remove the BARREL-OUTER CAM. BARREL-OUTER CAM Fig 3-27 3-14 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 26 (e) Remove the BARREL-OUTER GUIDE. BARREL-OUTER GUIDE Fig 3-28 (f) Remove the BARREL-INNER CAM/ ASSY SUB BARREL-ZOOMRING and ASSY SUB BARREL-2ND_OIS/ PLATE-INNER GUIDE. ASSY SUB BARREL-2ND_OIS/ PLATE- INNER GUIDE BARREL-INNER CAM/ ASSY SUB BARREL-ZOOMRING Fig 3-29 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-15 3-15...
  • Page 27 (g) Turn the ASSY SUB BARREL-ZOOMRING by clockwise direction as arrow and remove it. BARREL-INNER CAM Clockwise direction ASSY SUB BARREL-ZOOMRING Fig 3-30 (h) Remove the PLATE-INNER GUIDE. ASSY SUB BARREL-2ND_OIS PLATE-INNER GUIDE Fig 3-31 3-16 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 28: Reassembly Of Barrel

    3) Apply a light coating of the Grease KG-513 and 2) Apply the Grease RX-410 to the related parts make sure not to get any on the AF lens and other fo BARRIER ASSY. components. Apply Grease Apply Grease Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-17 3-17...
  • Page 29 ■ Apply the HANARL with a clean and good-quality brush, making sure the surface is clean. ■ HANARL is volatile product. Keep its container tightly covered. BARREL OUTER GUIDE Inside surface thoroughly ASSY SUB BARREL-OUTER CAM Inside surface thoroughly Fig. 3-32 3-18 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 30 Disassembly and reassembly ASSY SUB BARREL-ZOOMRING Apply the three Pin Around the outside friction surface BARREL-INNER CAM Inside and outside surface thoroughly Fig. 3-33 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-19 3-19...
  • Page 31 (b) Assemble the ASSY SUB BARREL-2ND_OIS and PLATE-INNER GUIDE by aligning the part “a with b” as illustrated. (Does not matter the Three location ~ ③.) ① ⓐ ② ASSY SUB BARREL-2ND_OIS ① ③ PLATE-INNER GUIDE ② ⓑ ③ ① Fig 3-35 3-20 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 32 (d) Converge the protrusion part to the middle as part "a" of "Fig.A" and then assemble the BARREL-OUTER GUIDE by aligning the part “b” as illustrated. ⓐ ⓑ Fig. A BARREL-OUTER GUIDE Fig 3-37 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-21 3-21...
  • Page 33 (e) Assemble the ASSY SUB BARREL-OUTER CAM by aligning the part “a" with "b” as illustrated. ⓐ ⓑ ASSY SUB BARREL-OUTER CAM Fig 3-38 (f) Assemble the BARREL BASE. BARREL BASE Fig 3-39 3-22 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 34 (g) After Assemble the FPCB HOLDER as illustrated, slide it into the marked slot “a". ⓐ Fig. A Fig 3-40 (h) Assemble the ASSY LENS BASE-D5 by aligning the part “a" with "b” as illustrated. ASSY LENS BASE-D5 ⓐ ⓑ Fig 3-41 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-23 3-23...
  • Page 35 Disassembly and reassembly (i) Assemble the ASSY ZOOM-0523-D5 by aligning the part “a", "b", "c" as illustrated. ⓑ ⓐ ⓒ ASSY ZOOM-0523-D5 Fig 3-42 3-24 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 36 Disassembly and reassembly 2. Reassembly of BARREL FPCB. (a) Tighten the oen SCREW. SCREW-TAPTYPE Fig 3-43 (b) Assemble the FPCB as "Fig. A". Assemble the FPCB of CONNECTOR. FPCB FPCB Fig. A Fig 3-44 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-25 3-25...
  • Page 37 Disassembly and reassembly (c) Tighten the five SCREWs. SCREW-TAPTYPE SCREW-TAPTYPE Fig 3-45 3. Reassembly of PCB FPC-CCD ASSY. (a) Assemble the PCB FPC-CCD ASSY. PCB FPC-CCD ASSY Fig 3-46 3-26 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 38 Disassembly and reassembly (b) Tighten the three SCREWs. SCREW-TAPTYPE Fig 3-47 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-27 3-27...
  • Page 39: Pcb Diagrams

    PCB diagrams 4. PCB diagrams 4-1 MAIN PCB BOTTOM Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 40: Top Pcb

    PCB diagrams 4-2 TOP PCB 4-3 CCD FPCB BOTTOM Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 41: Block Diagram

    AUDIO BLOCK LCD BLOCK N6_5VCC BLOCK 13VCC_CCD Micro USB switch BATT (MAX14616EWA+T) MONO SPEAKER BP70A AD07-00150A CLAA027GE25DE 3_1VCC_HRGVDD CHARGER IC Micro USB IO SOCKET (2.7", QVGA) 3VCC_TG MONO MIC. (MAX14616EWA+T) (HY07-AB0721) 3_3VCC_KA CHARGER LED Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 42: Firmware Update

    1. First turn on the power of the camera. Power ON Fig. 6-1 2. Press the WIDE button + DOWN button and then turn the POWER off. DOWN WIDE Power OFF WIDE button + DOWN button Fig. 6-2 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 43 Firmware update 3. Turn the power of the camera on again to check whether it has been reset. Fig. 6-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 44: Version Check

    SHUTTER button + DOWN button, and then turn the POWER on. DOWN SHUTTER Power ON SHUTTER button + DOWN button Fig. 6-4 4. Check the version of the firmware and then turn the power off. Fig. 6-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 45: Upgrade

    2. Use the AC adaptor or fully charged batteries for the power. * You can proceed with the upgrade only when the battery level is full (Icon showing full up to 3rd level). 3. Turn on the power of the camera. Power ON Fig. 6-6 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 46: Shutter Button

    Fig. 6-7 5. The progress of the firmware upgrade will be displayed on the LCD and the upgrade will proceed. Fig. 6-8 6. When the upgrade is completed, the camera will automatically be turned off. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 47: Adjustment

    7. Adjustment 7-1 Basic guide for adjustment ■ After replacing an electronic part, you must make changes for each adjustment item in the ST76/ST77 or ST76VE/ST77VE. ■ The following table shows the necessary adjustment item for replacing each part. ■ The camera must be fixed with a tripod and levelled condition must be maintained.
  • Page 48 Display adjusted value and whether Display adjusted value and whether it is OK (LCD) it is OK (LCD) Set process ID (EEPROM) Auto Power Off or continue with process Power Off or stand by Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 49: Lens Shading Adj

    On the memory card, open and check if a CSV file was generated from the adjustment.. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 50: Shutter Close Time Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 51: Flash Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 52: Punt Adj

    - Set up the camera toward a building or object in infinite distance (more than 500m). (Do not use the chart) - Set a cathedral, apartment or object with high contrast in day environment/AF area display. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 53 For the adjustment in these environments, AF may not be accurate when shooting Tele or macro. 3. Turn on the power of the camera. 4. The adjustment will automatically start. <Adjustment result> On the memory card, open and check if a CSV file was generated from the adjustment. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 54: Vertical Line Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 55: Ccd Defect Adj

    Put your camera, face up, on a steady surface such as a table or anything solid that won’t move. Don’t put your camera on a highly unstable surface. Also don’t put your camera down or hold it. The noise may significantly affect degrading the Gyro Sensor and Hall Sensor performance. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 56: Backlash Adj

    Prepare the log file and move to Wide. 4. When the adjustment is completed, the camera will automatically be turned off. <Adjustment result> On the memory card, open and check if a CSV file was generated from the adjustment. 7-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 57: Serial Number Writing Process

    5) When the adjustment is completed, the camera will automatically be turned off. <Process result> When checking the version (Press SHUTTER button and DOWN button to turn on), S/N appears on the screen. S/N: 123456789123 Fig. 7-9 Copyright© 1995-2012 SAMSUNG. All rights reserved. 7-11...
  • Page 58: St77/St76 Exploded View And Parts List

    Exploded view and parts list 8. ST77/ST76 Exploded view and parts list 8-1 BODY ASSEMBLY Loc. No Parts No. Description Q ty Available Remark AD92-01855A ASSY KEY PCB AD61-05557A FRAME MAIN AD97-21828A ASSY LCD 2.7'(CPT) 6001-002166 SCREW MACHINE-BK 6001-002152 SCREW MACHINE-BK...
  • Page 59: Chamber Assembly

    SPRING TS AD66-00885A LEVER BATTERY LOCK 6044-001137 E-RING 6107-001556 SPRING CS AD63-06633A COVER SOCKET-BK BLACK AD63-06633B COVER SOCKET-RD AD63-06633C COVER SOCKET-WH WHITE AD63-06633D COVER SOCKET-PP PURPLE AD63-06633E COVER SOCKET-SL SILVER 2-10 AD61-05556A PLATE BATTERY HOLDER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 60: Top Pcb Assembly

    Q ty Available Remark AD94-00255A ASSY TOP PCB-SMD AD97-21942A ASSY FLASH MODULE 3003-001183 AD41-01805A TOP FPCB 0601-003138 AF-LED 3001-002641 SPEAKER AD61-05559A HOLDER TOP AD41-01855A ASSY COIN PCB 2401-005082 CONDENSOR 3-10 AD92-01863A CONDENSOR PCB ASSY Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 61: Front Cover Assembly

    8-4 FRONT COVER ASSEMBLY 4-12 4-11 4-10 4-13 Loc. No Parts No. Description Q ty Available Remark AD63-06627A COVER FRONT_BK_ST77 BLACK AD63-06627B COVER FRONT_RD_ST77 AD63-06627C COVER FRONT_WH_ST77 WHITE AD63-06627D COVER FRONT_PP_ST77 PURPLE AD63-06627E COVER FRONT_SL_ST77 SILVER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 62 AD97-22032E ASSY COVER FRONT-SL_ST76 SILVER AD97-22233A ASSY COVER FRONT-BK_ST78 BLACK AD97-22233C ASSY COVER FRONT-WH_ST78 WHITE AD97-22233D ASSY COVER FRONT-PP_ST78 PURPLE AD97-22233E ASSY COVER FRONT-SL_ST78 SILVER AD97-22230A ASSY COVER FRONT-BK_ST79 BLACK AD97-22230B ASSY COVER FRONT-RD_ST79 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 63: Back Cover Assebly

    BUTTON OK-SL SILVER AD64-03174A WINDOW REAR ACCESS AD61-05575A HOLDER STRAP AD97-21834A ASSY COVER BACK-BK BLACK AD97-21834B ASSY COVER BACK-RD AD97-21834C ASSY COVER BACK-WH WHITE AD97-21834D ASSY COVER BACK-PP PURPLE AD97-21834E ASSY COVER BACK-SL SILVER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 64: Barrel Assembly

    6-19 6-34 6-11 6-33 6-10 6-42 6-51 6-49 6-41 6-31 6-18 6-32 6-17 6-40 6-30 6-16 6-29 6-39 6-38 6-46 6-15 6-28 6-14 6-48 6-27 6-13 6-26 6-25 6-12 6-24 6-23 6-22 6-50 6-53 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 65 SHIELD-CAM 6-18 AD67-02363A BARREL-OUTER CAM 6-19 AD67-02365A BARREL-OUTER GUIDE 6-20 AD67-02366A BARREL-BASE 6-21 AD81-04801A A/S-MAIN PCB TAPE 6-22 AD63-06512A SHEET-G3 6-23 AD67-02339A LENS ASP LENS-G3 6-24 AD67-02337A LENS-G4 6-25 AD67-02338A LENS 6-26 AD67-02359A BARREL-2ND Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 66 ASSY SUB BARREL-OUTERCAM_RD 6-51 AD97-22113A ASSY SUB BARREL-OUTERCAM_PP PURPLE AD97-22111A ASSY SUB BARREL-OUTERCAM_SL SILVER 6-52 AD92-01785A ASSY PCB FPC-CCD AD97-21935A ASSY BARREL_BK_OIS BLACK AD97-22099A ASSY BARREL_RD_OIS 6-53 AD97-22098A ASSY BARREL_PP_OIS PURPLE AD97-22096A ASSY BARREL_SL_OIS SILVER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 67: Barrel Assebly_Non-Ois_St76

    6-34 6-11 6-33 6-10 6-42 6-51 6-49 6-41 6-31 6-18 6-32 6-17 6-40 6-30 6-16 6-29 6-39 6-38 6-46 6-15 6-28 6-14 6-48 6-27 6-13 6-26 6-25 6-12 6-24 6-23 6-22 6-50 6-53 8-10 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 68 AD67-02363A BARREL-OUTER CAM 6-19 AD67-02365A BARREL-OUTER GUIDE 6-20 AD67-02366A BARREL-BASE 6-21 AD81-04801A A/S-MAIN PCB TAPE 6-22 AD63-06512A SHEET-G3 6-23 AD67-02339A LENS ASP LENS-G3 6-24 AD67-02337A LENS-G4 6-25 AD67-02338A LENS 6-26 AD67-02359A BARREL-2ND 8-11 8-11 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 69 ASSY SUB BARREL-OUTERCAM_RD 6-51 AD97-22113A ASSY SUB BARREL-OUTERCAM_PP PURPLE AD97-22111A ASSY SUB BARREL-OUTERCAM_SL SILVER 6-52 AD92-01785A ASSY PCB FPC-CCD AD97-21938A ASSY BARREL_BK_NON-OIS BLACK AD97-22094A ASSY BARREL_RD_NON-OIS 6-53 AD97-22093A ASSY BARREL_PP_NON-OIS PURPLE AD97-22091A ASSY BARREL_SL_NON-OIS SILVER 8-12 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 70: Packing Items

    AD43-00194A BATTERY_BP70A AD39-00190A DATA LINK CABLE-MICRO USB AD39-00191A AV OUT CABLE-MICRO USB AD44-00178A ADAPTOR-KOR AD44-00184A ADAPTOR-CHI AD44-00179A ADAPTOR-USA AD44-00180A ADAPTOR-BRA AD44-00181A ADAPTOR-ARG AD44-00182A ADAPTOR-UK AD44-00183A ADAPTOR-EXP AD44-00185A ADAPTOR-AUS AD63-02596A STRAP_KENOX_S730_SILVER AD63-02604A STRAP_KENOX_S860_BLACK 8-13 8-13 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 71: St77Ve/St76Ve Exploded View And Parts List

    ASSY COVER FRONT-SL_ST77 VE SILVER AD97-22032A ASSY COVER FRONT-BK_ST76 VE BLACK AD97-22032B ASSY COVER FRONT-RD_ST76 VE AD97-22032C ASSY COVER FRONT-WT_ST76 VE WHITE AD97-22032D ASSY COVER FRONT-PK_ST76 VE PINK AD97-22032E ASSY COVER FRONT-SL_ST76 VE SILVER 8-14 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 72 ASSY BODY-EX-PK_ST77 VE PINK AD90-05115E ASSY BODY-EX-SL_ST77 VE SILVER AD90-05116A ASSY BODY-EX-BK_ST76 VE BLACK AD90-05116B ASSY BODY-EX-RD_ST76 VE AD90-05116C ASSY BODY-EX-WT_ST76 VE WHITE AD90-05116D ASSY BODY-EX-PK_ST76 VE PINK AD90-05116E ASSY BODY-EX-SL_ST76 VE SILVER 8-15 8-15 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 73: Front Cover Assembly

    PINK AD63-06801E COVER FRONT-SL_ST76 VE SILVER AD97-21832A ASSY BUTTON POWER-BK BLACK AD97-21832B ASSY BUTTON POWER-RD AD97-21832C ASSY BUTTON POWER-WT WHITE AD97-21832D ASSY BUTTON POWER-PK PINK AD97-21832E ASSY BUTTON POWER-SL SILVER AD97-21831A ASSY ZOOM 8-16 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 74 ASSY COVER FRONT-SL_ST77 VE SILVER AD97-22032A ASSY COVER FRONT-BK_ST76 VE BLACK AD97-22032B ASSY COVER FRONT-RD_ST76 VE AD97-22032C ASSY COVER FRONT-WT_ST76 VE WHITE AD97-22032D ASSY COVER FRONT-PK_ST76 VE PINK AD97-22032E ASSY COVER FRONT-SL_ST76 VE SILVER 8-17 8-17 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 75: Chamber Assembly

    ASSY COVER BATTERY-BK BLACK AD97-21829B ASSY COVER BATTERY-RD AD97-21829C ASSY COVER BATTERY-WT WHITE AD97-21829D ASSY COVER BATTERY-PK PINK AD97-21829E ASSY COVER BATTERY-SL SILVER 6107-001766 SPRING TS AD66-00885A LEVER BATTERY LOCK 6044-001137 E-RING 6107-001556 SPRING CS 8-18 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 76: Lcd Assembly

    ASSY CHAMBER-WT WHITE AD97-21837D ASSY CHAMBER-PK PINK AD97-21837E ASSY CHAMBER-SL SILVER 9-4 LCD ASSEMBLY Loc. No Parts No. Description Q ty Available Remark AD64-03583A WINDOW LCD AD63-06654A T/SHEET LCD AD07-00150A AD97-21828A ASSY LCD 8-19 8-19 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 77: Back Cover Assembly

    BOTTON BACK-RD AD64-03609F BOTTON BACK-WT WHITE AD64-03609G BOTTON BACK-PK PINK AD64-03609H BOTTON BACK-SL SILVER AD64-03608B BUTTON OK-BK BLACK AD64-03608C BUTTON OK-RD AD64-03608D BUTTON OK-WT WHITE AD64-03608E BUTTON OK-PK PINK AD64-03608F BUTTON OK-SL SILVER 8-20 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 78: Top Pcb Assembly

    Q ty Available Remark AD94-00255A ASSY SMD INSERT AD97-21942A ASSY FLASH MODULE 3003-001183 MIC-CONDENSOR AD41-01805A FPC-TOP CONNECTION 0601-003138 3001-002641 SPEAKER AD61-05559A HOLDER TOP AD92-01863A ASSY PCB SUB-SUB CONDENSOR PCB AD92-01783A C-AL(Main Condensor) 8-21 8-21 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 79: Main Frame Assembly

    9-7 MAIN FRAME ASSEMBLY Loc. No Parts No. Description Q ty Available Remark AD61-05557A FRAME MAIN AD63-06870A CUSION CONNECTOR AD63-06871A CUSION DSP AD63-06872A CUSION MAIN PCB AD68-06877A CUSION BARREL A AD97-22226A ASSY FRAME-MAIN 8-22 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 80: Battery Cover Assembly

    AD63-06632D COVER BATTERY LOCK-PK AD63-06632E COVER BATTERY LOCK-SL AD61-05558A PLATE COVER BATTERY AD97-21829A ASSY COVER BATTERY-BK AD97-21829B ASSY COVER BATTERY-RD AD97-21829C ASSY COVER BATTERY-WT AD97-21829D ASSY COVER BATTERY-PK AD97-21829E ASSY COVER BATTERY-SL 8-23 8-23 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 81: Zoom Assembly

    Exploded view and parts list 9-9 ZOOM ASSEMBLY Loc. No Parts No. Description Q ty Available Remark AD64-03682A BUTTON RELEASE 6107-003327 SPRING-CS AD64-03579A KNOB ZOOM DECO AD64-03580A KNOB ZOOM 6031-001628 WASHER PLAIN AD97-21831A ASSY ZOOM 8-24 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 82: St77Ve/St76Ve Barrel Assembly

    Exploded view and parts list 9-10 ST77VE/ST76VE BARREL ASSEMBLY 8-25 8-25 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 83 DECO RING-CAM_PP PURPLE AD64-03654A DECO RING-CAM_SL SILVER AD63-06796A SHIELD-CAM AD67-02363A BARREL-OUTER CAM AD67-02365A BARREL-OUTER GUIDE AD67-02366A BARREL-BASE AD81-04801A A/S-MAIN PCB TAPE AD63-06512A SHEET-G3 AD67-02339A LENS ASP LENS-G3 AD67-02337A LENS-G4 AD67-02338A LENS AD67-02359A BARREL-2ND 8-26 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 84 ASSY SUB BARREL-OUTERCAM_RD AD97-22113A ASSY SUB BARREL-OUTERCAM_PP PURPLE AD97-22111A ASSY SUB BARREL-OUTERCAM_SL SILVER AD92-01928A ASSY PCB FPC-CCD AD97-21935A ASSY BARREL_BK_OIS BLACK AD97-22099A ASSY BARREL_RD_OIS AD97-22098A ASSY BARREL_PP_OIS PURPLE AD97-22096A ASSY BARREL_SL_OIS SILVER 8-27 8-27 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 85 E.Asia, W.Asia, China, Japan https://gspn2.samsungcsportal.com N.America, S.America https://gspn3.samsungcsportal.com © 2012 SAMSUNG Electronics Co.,Ltd This Service Manual is a property of Samsung Electronics Co.,Ltd. All rights reserved. Any unauthorized use of Manual can be punished under Printed in Korea applicable International and/or domestic law.

This manual is also suitable for:

St77St77veSt78St79St76ve

Table of Contents