Draytek VigorNIC 132 series User Manual page 27

Primary DNS
Second DNS
VLAN Tag insertion
(VDSL2)/(ADSL)
Back
Next
Cancel
2. After finished the above settings, simply click Next. Manually enter the
Username/Password provided by your ISP
Available settings are explained as follows:
Item
Service Name
(Optional)
Username
Password
Confirm Password
VigorNIC 132 Series User's Guide
Type in the primary IP address for the router.
Type in secondary IP address for necessity in the future.
The settings configured in this field are available for WAN1
and WAN2.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The range
is from 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
Description
Enter the description of the specific network service.
Assign a specific valid user name provided by the ISP.
Note: The maximum length of the user name you can set is
63 characters.
Assign a valid password provided by the ISP.
Note: The maximum length of the password you can set is 62
characters.
Retype the password.
17