Dat Drive; Cassette Loading And Unloading - Zenith z-server lt User Manual

DAT Drive

Cassette Loading and Unloading

(D-10: 65040010)
The Model DT-0210 is a 1.3/2.0G DAT Drive. The following
configuration and operation information is presented to assist
you with the installation and operation of the DAT Drive. The
DAT Drive is installed in Bay C of the computer.
The cassette insertion slot on the front panel of the drive provides
for easy loading and unloading of the tape cassette.
Insert the cassette with the arrow on the top of the cassette
entering the slot first.
Unload the cassette by pressing the eject (tape unloading) button
at the top right of the front panel (refer to "Front Panel" later in
this section). When the eject button is pressed, the drive updates
the system log, rewinds the tape, and then ejects the cassette. It is
partially ejected and can then be easily removed from the drive.
Note: The time between pressing the eject button and cassette
ejection may be several seconds.
D-23
Devices