Adjusting The Mix Sound Level; Setting The Clock Mode; Selecting The Background Display; Restoring The Default Settings - Pioneer SPH-DA100 Operation Manual

Customising preferences

Adjusting the mix sound level

You can adjust the mixed sound volume in three
levels.
When the audio sources are mixed, the second
sound channel plays at this setting level.
1 Display the "System" screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Mixed Sound Level].
Tapping [ Mixed Sound Level
tween the three levels:
Low — Mid (default) —
❐ Sound level " High " is the largest and "
is the smallest.

Setting the clock mode

You can change the time format.
1 Display the "System" screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Clock Mode].
Tapping [ Clock Mode
follows:
• 1H (default):
Changes the display to 12-hour format.
• 4H:
Changes the display to 24-hour format.

Selecting the background display

You can change the audio source screen back-
ground and Home screen background.
1 Display the "System" screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Background].
The background screen appears.
3 Tap the desired background display.
] switches be-
High
Low
] changes the settings as

Restoring the default settings

Resets various settings registered to this prod-
uct and restores them to the default settings.
❐ " System Reset
source is set to " OFF ".
1 Display the "System" screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [System Reset].
A message confirming whether to restore the
settings appears.
"
3 Tap [OK].
If you do not want to restore the settings,
■
tap [ Cancel ].

Checking the connections of leads

Check that leads are properly connected be-
tween this product and the vehicle. Please also
check whether they are connected in the cor-
rect positions.
1 Display the "System" screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Connection Status].
The " Connection Status
" can be set only when the
" screen appears.
Engb
Chapter
08
45