Honeywell CL15AC Owner's Manual page 19

PROBLEM
The unit does not respond
Odour omission
For product enquiry or support contact :
CUST OMER CARE : 1300 7108 60
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
Remote control batteries.
Damaged PCB
New Unit.
Old Unit.
SOLUTION
Check batteries, Replace if
needed. Try to operate using
the control panel.
Try with remote control. If the
unit responds, PCB board
fasteners may be loose.
Contact service centre.
If neither remote control nor
control panel works, PCB
board may be damaged.
Contact service centre.
When the unit is used for the
first time, the Honeycomb
cooling media will have an
odour, which will dissipate
within a week of initial use.
There may be an algae issue,
Replace the honeycomb cooling
media. Contact customer care.
17