Setting The Ring Tones - Cisco 7920 User Manual

Viewing the Board Support Package Load ID
1. Follow the steps in "Viewing the Firmware
Information" section on page 58.
2. Press
Package (BSP) Load ID.
3. Press
Viewing the Boot Load ID
1. Follow the steps in the "Viewing the Firmware
Information" section on page 58.
2. Press
3. Press

Setting the Ring Tones

1. Open the Phone Settings menu. Scroll to Ring
Tones. Then press
2. Press
press
3. Two default ring tones and one user downloaded
ring tone are available. Press
to the desired ring tone.
4. Press
Cisco Wireless IP Phone 7920 User Guide
Configuring Profiles and Phone Settings
or to scroll to Board Support
. The BSP Load ID is displayed.
or to scroll to Boot Load ID.
. The Boot Load ID is displayed.
or to scroll to Select Ring Tone. Then
.
to select and play the ring tone.
.
or to scroll
59