1 INTRODUCTION This HCNA (XL-HC128C) to Ethernet bridge connects any Ethernet device to a high speed access device or to a LAN for Internet access. This bridge brings you the newest Ethernet compatible technology that uses the coaxial cable as the network's physical wiring thereby eliminating the need to install new wiring.
______________________________________________________________________________________________________ XtendLan XL-HC128C User's guide www.xtendlan.com 3 HARDWARE INSTALLATION 3.1 LED Indicators on the Front Panel Status Glowing Dimming Flashing 1 Powered by Not powered Power DC5V LAN Link /Act-1 LAN 1 Disconnect or Receive or 2 Link Link fail Transmit LAN Link /Act-2 LAN 2...
______________________________________________________________________________________________________ XtendLan XL-HC128C User's guide www.xtendlan.com Port Name Type Functions Connect to the power adapter plug. DC5V Connect to Ethernet port on FTTH or xDSL Modem or Switch LAN1/LAN2 RJ-45 for Internet Access. (Ethernet) Connect to TV Connect to HCNA devices HCNA 3.3 Essential Hardwares ...
______________________________________________________________________________________________________ XtendLan XL-HC128C User's guide www.xtendlan.com 3.4 Hardware Connections 1. Select a convenient location for the bridge near the PC or Ethernet device to which it will be connected. The bridge should be kept away from excessive heat. 2. Using one coaxial cable to connect the HCNA port to F-Type connector on the wall. Using another coaxial cable to connect the other F-type TV port to TV set.