Bosch Greentherm 9800 SE 160/199 Manual page 43

After the display's position has been adjusted:
▶ Touch the symbol
A7 Wireless Connectivity
Only available with WIFI accessory module (TTNr-TBD).
▶ Touch the symbol
Display shows following menu.
– BL Bluetooth
– WIFI
A8 Startup Delay
Fig. 40 A8- Startup Delay
This menu allows programing a burner start delay between 0
and 60 seconds, after detecting water flow.
▶ Access to information / adjustments menu.
Display shows SA Settings.
▶ Use the symbols
▶ Touch the symbol
Display shows Startup Value(s).
▶ Touch the symbol
▶ Touch the symbols
delay to start-up after detection of the water flow.
▶ Touch the symbol
A9 Units Set
This menu allows you to choose the units visible on the display.
Fig. 41 A9 - Units
Greentherm 9800 SE 160/199 | SEC 199
to exit.
.
or to choose A8 Startup Delay.
.
.
or to define, in seconds, the
after reaching the desired value.
▶ Access to information / adjustments menu.
Display shows SA Settings.
▶ Touch the symbol
▶ Touch the symbol
▶ Use the symbols
Metric ( °C l/min)
Imperial ( °F gal/min)
▶ Touch the symbol
The selected units blinks, display indicates A9 Units.
AA Display Timeout
Fig. 42 AA- Backlight Control
Activation of brightness control increases energy savings when
the appliance is idle.
This menu lets you control 3 parameters of the display when
idle, or when the unit is not in use:
• enable / disable brightness control
• after which time the brightness control is activated
• brightness level
▶ Access to information / adjustments menu.
Display shows SA Settings.
▶ Touch the symbol
Backlight Control.
▶ Touch the symbol
Display shows Backlight.
Fig. 43 Backlight control menu
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
Operating Instructions | 43
until A9 Units is in the display.
.
or to select measurement units.
after selecting the desired units.
until the display shows AA
.
.
or to select DIM.
.
6 720 816 815 (2016/10)