Protective Cover For Hdi 138 Engines; Draining Water From The Fuel Filter - CITROEN C5 2008 Owner's Manual

D I E S E L I N J E C T I O N E Q U I P M E N T
2
1
4
Protective cover for HDi 138
engines:
Remove the protective cover by
3, then 1 and 4.
Unclip at 2 by pulling towards you,
then lift up.
clip in at 2. Lower and centre the
cover. Clip in at 3 and 4, pushing
vertically and gently from the rear.
Clip in at 1 pushing vertically.
Protective cover for HDi 110,
HDi 173 and V6 HDi 208
engines:
Pull the protective cover upwards
to remove.
3
Draining water from the fuel
Drain regularly
change).
To drain the water, slacken the
bleed screw or the water in diesel
fuel sensor, located at the base of
.
Continue until all the water has
.
Then retighten the bleed screw or
the water detection sensor.
HDi engines are the result of advanced technology.
(at each oil
CITROËN dealer can guarantee.
V
151