Buttonholes - Husqvarna ZIGZAG 1030 Operating Manual

ButtonholesUpeU
dr
Ina
order
to sew, buttonholes.
you
should change
] lsidle
side
over to the hut to nhole foot (41 I I 650). You will i
find it in. the accessory box and it is attached in theH
same way as thle ordinary snap-on presser foot, Thle1
buttonhole foot has graduated markings to help youU
make the buttonholes thle same length.
,
Loosen the upper thread tension by turning the
thread tension dial to, the buttonh ole symbol, if you
•
wi .
Th
button hole will look better, if
you
use a fine
thread.
:
1 -
I-
I
..
Mark on the fabric where you want to place the
buttonhole. Always first test sew a buttonhole andaj
sth sich
etng•
Begin as usual by ma king sure th at the needle is at
tehighest position. Turn the needle position con-
•
trlto tlire Ieft. Set the stitch length dial at approx-
imtely
0.3 and press in thle reverse stitching hiutton
adfasten it.
.,
NOTIE:
When sewing buttonholes, the reverse stitch-
en bultton inn st not be regulamted by hand.- Turn the•
sti.itc ,hh dial to 4 and slide the catch under thet
I/
21