Technical Data - AEG FOEN HT 5608 Instruction Manual

English
20
Commissioning
Unwind the mains cable completely.
Electrical Connection
• Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the device.
You can find this information on the nameplate.
• Connect the appliance to a properly installed safety
socket.
Use
Switch the selector on the handle to the desired heat/blower
setting:
Position : off
Position I: gentle air flow and medium temperature
Position II: strong air flow and high temperature
Switch-off
After use, switch the selector to " " and disconnect the
mains plug.
NOTE:
The wall bracket has a contact switch. If you hang up the
appliance when switched on, it will automatically switch off.
Storage
• Leave the device to cool before putting it away! To do so,
lay the appliance on one side of its housing.
• You can also hang it on the wall bracket you mounted
earlier.
Mains Cable
• When resting the appliance on its side, simply coil up the
power cord loosely.
• Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
• Check the mains cable regularly for damage.
Maintenance and care
WARNING:
• Before cleaning remove the mains lead from the
socket.
• Under no circumstances should you immerse the
device in water for cleaning purposes. Otherwise this
might result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
CAUTION:
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a
result of heat accumulation.
• Remove any dirt that is present.
• If necessary, a fine brush can be used.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 78 dB(A) (no limit)

Technical Data

Model: ...................................................................................HT 5608
Power supply: .............................................................230 V~; 50 Hz
Power consumption:............................................................ 1200 W
Protection class: ................................................................................II
Net weight: .............................................................................0.35 kg
Subject to technical changes without prior notice!
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.