05
NAVIGATION - GUIDANCE
Adding a waypoint
Press on Navigation to display the primary
page then go to the secondary page.
Select "Enter destination".
Select "Itinerary".
Select "Add waypoint" then "Address".
The address of the waypoint is entered in
the same way as a destination, so enter
the "City:" or post code, the "Road:" and
the "N°:". Confirm each time.
Then select "Add waypoint".
Select "Navigate to".
Select the criteria then "Confirm" to start
guidance and give the general direction of the
navigation route.
268
Organising waypoints
To organise waypoints, carry out the previous operations 1 to
3 again (Adding a waypoint).
Select the waypoint that you want to move in
the order.
Select "Up".
Select "Down".
Select "Delete".
Select "Road map" to view the changes made
to the route.