Advertisement
Appendix A
The following tables describe all of the fields and possible values that can appear on
the TV when you are reviewing MoCA diagnostic screens. They can be useful for
troubleshooting MoCA issues.
DRIVERS - MoCA SUMMARY PG 1
Field Name
Node ID
Enable
Brdcast PHY
Rate
MoCA Version Version of the MoCA standard
LOF
MAC Address MAC address of the MoCA
Status
Up Time
Link Privacy
TP-00116-01
Description
The local node ID
Indicates whether MoCA is
enabled on this set-top
Data rate used for packets
broadcast to all other nodes
supported by the set-top
Last Operational Frequency (in
MHz). The set-top will
automatically default to this
frequency after a reboot.
interface
Status of the MoCA network
Length of time that the Status
has been at Link Up
Indicates the status of Link
Privacy
Possible Values
[Range: 0 – N] where N = 15 for
MoCA 1.1
True—preferred value
False
Note: Status is controlled at the
headend.
[Integer > 0]
Note: Minimum value is 200 Mbps,
lower rates require fixing the home
coaxial wiring.
Wait at least 30 seconds after Link
Up is achieved then verify
Broadcast PHY Rate.
[Set-top-dependent]
[Integer > 0]
Note: This is typically equal to the
RF channel.
Based on the STB RF MAC on the
back of the set-top.
Example: If the STB RF MAC of
the set-top is 00:1E:6B:D2:4D:4C,
the MoCA interface MAC is
20:1E:6B:D2:4D:4C.
Link Up—preferred value
No Link
Disabled
Note: Link Up indicates that the
node has successfully joined the
network.
[Time]
Example: 3h 10m 6s
Enabled—preferred value
Disabled
Appendix A
19
Hide quick links:
Advertisement
