Table of Contents
Advertisement
3
INSTALLATION
3.1
Removing the belt clip
Pull the belt clip latch away from
the PMR.
While pulling the belt clip latch,
push up the belt clip.
3.2
Installing the belt clip
Slide the belt clip into the slot.
>A "click" indicates the belt clip
is locked into its position.
3.3
Installing the batteries
(see P3)
Slide down the battery compartment cover.
Insert 3 x AAA rechargable batteries. Position the batteries according
to the polarity marking on the battery compartment.
Replace the battery cover.
Notes:
The PMR units have a built-in power saver (PS) for maximum battery
life, but when not in use, turn the units off to save battery power.
Remove the batteries if the units will not be used for a long period
of time.
Only use rechargable batteries when using the charging function
Belt clip latch
Fig. 1
5
Fig. 2
Advertisement
Table of Contents
