Related Manuals for Motorola MBP84SN
Summary of Contents for Motorola MBP84SN
- Page 1 USER’S GUIDE Smart Nursery Baby-and-Me Scale Model: MBP84SN The features described in this guide are subject to modifications without prior notice.
- Page 2 & height. Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
- Page 3 Overview of the Scale 1. LCD Display 3. PAIR Button The power saving backlight turns Long press to pair the Scale with ® on when weight is detected and your Smart Device via Bluetooth switches off after 3 minutes. link. Make sure that your Smart ®...
-
Page 4: Lcd Display
LCD Display "Baby-and-Me" lights up when "Baby-and-Me" mode weighing mode is selected. To access "Baby-and-Me" weighing mode, slide the weighing mode selection switch inside the battery compartment to the left. Stones Press the PAIR button on the underside of the Scale to choose as the weighing unit. -
Page 5: Table Of Contents
Table of contents 1. Safety Instructions ..................6 2. System Requirements...................8 3. Getting Started .....................9 Power on the Scale .................9 ® User Account and Scale Setup on Android™ Devices / iPhone ® iPad ....................10 Download Hubble Connect for Smart Nursery App ......10 Run Hubble Connect for Smart Nursery App on Android™... -
Page 6: Safety Instructions
1. Safety Instructions WARNING This product is compliant with all relevant electromagnetic field standards and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device. - Page 7 Important guidelines for installing your Scale • Use of other 2.4 GHz products, such as other wireless networks or microwave ovens may cause interference with this product. Keep the Scale away from these types of products, or turn them off if they appear to be causing interference.
-
Page 8: System Requirements
2. System Requirements ® Smartphones/Tablets: Android™ and iOS only. ® Minimum requirement: iOS 8.0, Android™ 4.4.2 or above. For more information, please visit: https://hubbleconnected.com/ requirements System Requirements... -
Page 9: Getting Started
3. Getting Started 3.1 Power on the Scale 1. The Scale uses replaceable batteries (AAA size/LR03) and 3 Batteries were pre-installed into the battery compartment. Please remove the battery insulating tab before use. 2. The Scale powers on automatically when the batteries are installed correctly. -
Page 10: User Account And Scale Setup On Android™ Devices / Iphone Ipad
3.2 User Account and Scale Setup on Android™ Devices / ® ® iPhone / iPad What you need • Baby-and-Me Scale ® ® • Device with Android system / iPhone / iPad 3.3 Download Hubble Connect for Smart Nursery App •... -
Page 11: Add The Scale To Your Account
3.5 Add the Scale to your account • Tap on Smart Scale on screen to add Scale. (Picture A3) • Tap on Skip to Setup, the following setup instructions will appear on the screen. (Picture A4) • Press and hold the PAIR button on the back of the Scale (picture A4) until the PAIRING symbol appears on the LCD. - Page 12 • Tap on Start Pairing. ® • Turn on the Bluetooth function of your smart device as shown in picture A6. ® If Bluetooth function is on, then skip to the next step. • It will take a few minutes for your smart device to locate the Scale. Getting Started...
- Page 13 ® • Tap on the Mac address number under Device found to confirm Bluetooth connection. (Picture A7) • Picture A8 appears when the setup is successful. You can create profile of your baby and family by tapping Add Profile. • If connection fails, please tap Retry and repeat the steps starting from 3.5. •...
-
Page 14: Using The Scale
4. Using the Scale 4.1 Select Weighing Unit: Stones (st), Pounds (lb) or Kilograms (kg) Short press the PAIR button on the underside of the Scale to select st, lb or kg. 4.2 Change Weighing Mode Slide the hard switch in the battery compartment to the right to enter Normal Mode and slide to the left to enter Baby-and-Me mode. - Page 15 8. Hold the baby in your arms, step onto the Scale and stand still until the readings on the LCD stabilizes. 9. When the baby’s weight is locked, icon goes off while the baby indicator remains on. 10. Your baby’s weight will be transmitted to your smart device and displayed on the LCD for about 3 minutes before the Scale powers off automatically.
-
Page 16: Overview Of The Features On Hubble App
4.5 Overview of the Features on Hubble App Scan New Readings Tap the button to transmit the weight data from the Scale to your smart device. Add New Profile Tap the button to create profiles of your baby and family (Up to 4 profiles max). Key in Name, Gender, Date of Birth and Height. -
Page 17: Disposal Of The Device (Environment)
5. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. -
Page 18: Cleaning
6. Cleaning Clean your Scale with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Scale with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. -
Page 19: Help
7. Help Display No display • Try recharging or replacing the AAA battery cells. • Reset the Scale. Remove the battery cells then insert them back in. • Is the Scale turned on? Step on the Scale to turn it ON. •... -
Page 20: General Information
E-mail: support@motorolahome.com Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International Ltd ("BINATONE"). What Does this Warranty Cover? Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold... - Page 21 PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING...
- Page 22 (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage.
- Page 23 (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.
- Page 24 FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 25 WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s): Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including...
-
Page 26: Technical Specifications
9. Technical Specifications ® ® Bluetooth Bluetooth Power 3x AAA sized batteries (2R03/LR03) Operating Temperature 5 to 40 C / 41 to 104 Maximum/Minimum Weight 330lbs (150kg) / 11lbs (5kg) Measurement Accuracy 11lbs (5kg) - 110lbs (50kg) : ±0.6lbs (0.3kg); 110lbs (50kg) - 220lbs (100kg): ±0.8lbs (0.4kg);... - Page 27 Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo is a trademark of Apple Inc., registered in the U.S.