Bottom View - ViewSonic Pro9510L User Manual

Bottom view

I L
TEM ABEL
1.
Tilt Adjustor
2.
Ceiling Mount Holes
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 12 mm (0.47 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment over a period of 60 seconds.
D
ESCRIPTION
Rotate adjuster lever to adjust angle position.
Contact your dealer for information on mounting the projector on a
ceiling.
6
Ceiling mount screws:
M4 x 5 (Max. L = 12 mm)
Unit: mm
S
EE PAGE
16