Section 1: Programming The Ux5000 Communications Server; Ip Address : Program 10-12 - NEC UX5000 Quick Setup Manual

Section 1: Programming the UX5000 Communications Server

inDepth Basic Setup Guide
Section 1: Programming the UX5000 Communications Server
Section 1: Programming the UX5000 Communications
Server
This is a quick start guide for inDepth and so does not cover ACD Programming. Please refer to UX5000
ACD manual, P/N 0913206, for more details.
Before we can get inDepth to work, there are a few basic programming settings that have to be made in the
UX5000 communications server.

IP Address : Program 10-12

Before the CCPU can be used to collect real time event data, it will need an IP address. It is suggested that
you use an address and subnet mask that is in the "normal" range used by the end user or you might have
issues connecting the inDepth server to both the cCPU and the rest of the PCs on the LAN.
If you are using VoIP terminals you should use the settings in 10.12.09 and not 10.12.01.
PLEASE NOTE ANY CHANGES IN THIS PROGRAM WILL NOT TAKE EFFECT UNTIL THE
UX5000 IS RESET.
inDepth Quick Setup Guide for the UX5000
inDepth Basic Setup Guide
◆ 1